Supported Ionic Liquid-Phase Materials (SILP) as a Multifunctional Group of Highly Stable Modifiers and Hardeners for Carbon and Flax Epoxy Composites.

This paper introduces a novel approach to enhance epoxy resin formulations by using SILP materials as multifunctional hardeners and fillers in composite structures reinforced with carbon and flax fibers. This study explores the integration of ionic liquids (ILs) onto a silica support structure, presenting various permutations involving silica selection, ionic liquid choice, and concentration. The focus of this study was to elucidate the influence of SILP on resin curing ability and the mechanical properties of the resulting composites. Detailed research was conducted, including Brunauer-Emmett-Teller analysis (BET) for SILP materials and curing characterization for epoxy resin formulations with different SILP materials. Furthermore, the mechanical properties of the obtained composites were determined by Scanning Electron Microscopy analysis (SEM) (the force at break, the maximum elongation at break, tensile strength, and modulus of elasticity). Through SILP incorporation, the mechanical properties of composites, including the modulus of elasticity and tensile strength, are substantially improved, a phenomenon akin to traditional filler effects. The findings highlight SILP materials as prospective candidates for concurrent hardening and filling roles within composites (through a single-step procedure, with prolonged storage stability and controlled processing conditions), particularly pertinent as the composite industry veers toward epoxy bioresins necessitating liquefaction via temperature application.

New biologically active ionic liquids with benzethonium cation-efficient SAR inducers and antimicrobial agents.

BACKGROUND: An urgent need to find new methods for crop protection remains open due to the withdrawal from the market of the most toxic pesticides and increasing consumer awareness. One of the alternatives that can be used in modern agriculture is the use of bifunctional compounds whose actions towards plant protection are wider than those of conventional pesticides. RESULTS: In this study, we present the investigation of the biological efficacy of nine dual-functional salts containing a systemic acquired resistance (SAR)-inducing anion and the benzethonium cation. A significant result of the presented study is the discovery of the SAR induction activity of benzethonium chloride, which was previously reported only as an antimicrobial agent. Moreover, the concept of dual functionality was proven, as the application of presented compounds in a given concentrations resulted both in the control of human and plant bacteria species and induction of SAR. CONCLUSION: The strategy presented in this article shows the capabilities of derivatization of common biologically active compounds into their ionic derivatives to obtain bifunctional salts. This approach may be an example of the design of potential new compounds for modern agriculture. It provides plants with two complementary actions allowing to provide efficient protection to plants, if one mode of action is ineffective. © 2024 Society of Chemical Industry.

Application of Salicylic Acid Derivative in Modifying the Iron Nutritional Value of Lettuce (Lactuca sativa L.).

The present experiment addressed the effects of foliar sprays of different iron (Fe) concentrations (mg L-1), i.e., 2.8 (Fe I), 4.2 (Fe II), and 5.6 (Fe III), as well as an ionic derivative of salicylic acid (iSal) in two doses (10 and 20 mg L-1) on lettuce yield, chlorophyll and carotenoids content, and fluorescence parameters. Chemicals were used individually and in combinations two times, 23 and 30 days after the plants were transplanted. This experiment was carried out in a climate chamber. The Fe and iSal applications generally (except Fe I iSal, 10 mg L-1; Fe I iSal, 20 mg L-1; and Fe III iSal, 20 mg L-1) did not influence the fresh and dry matter content. The concentration of chlorophylls and carotenoids was reduced for all treatments in comparison to the control (without spraying). The Fe content in leaves was promoted in the Fe-treated plants (+70% for Fe III + iSal, 10 mg L-1, and Fe I). The iSal treatment promoted the Mn content. For most combinations, the Zn and Cu accumulations, as well as the fluorescence parameters, decreased after the foliar spray applications. Overall, our study revealed the effectiveness of Fe-DTPA chelate, but not iSal, in increasing the Fe content of lettuce grown in soilless cultivation systems.

Enhancement of Inhibition of the Pseudomonas sp. Biofilm Formation on Bacterial Cellulose-Based Wound Dressing by the Combined Action of Alginate Lyase and Gentamicin.

Bacterial biofilms generally contribute to chronic infections, including wound infections. Due to the antibiotic resistance mechanisms protecting bacteria living in the biofilm, they are a serious problem in the wound healing process. To accelerate the wound healing process and avoid bacterial infection, it is necessary to select the appropriate dressing material. In this study, the promising therapeutic properties of alginate lyase (AlgL) immobilised on BC membranes for protecting wounds from Pseudomonas aeruginosa infection were investigated. The AlgL was immobilised on never dried BC pellicles via physical adsorption. The maximum adsorption capacity of AlgL was 6.0 mg/g of dry BC, and the equilibrium was reached after 2 h. The adsorption kinetics was studied, and it has been proven that the adsorption was consistent with Langmuir isotherm. In addition, the impact of enzyme immobilisation on bacterial biofilm stability and the effect of simultaneous immobilisation of AlgL and gentamicin on the viability of bacterial cells was investigated. The obtained results showed that the AlgL immobilisation significantly reduced the amount of polysaccharides component of the P. aeruginosa biofilm. Moreover, the biofilm disruption by AlgL immobilised on BC membranes exhibited synergism with the gentamicin, resulting in 86.5% more dead P. aeruginosa PAO-1 cells.

Resistance Inducers for the Protection of Pedunculate Oak (Quercus robur L.) Seedlings against Powdery Mildew Erysiphe alphitoides.

Oak powdery mildew caused by Erysiphe alphitoides (Griffon and Maubl.; U. Braun & S. Takam.) is a common disease in European forests. One of the most susceptible species is the pedunculate oak (Quercus robur L.). Presently, a few methods are available to control powdery mildew, e.g., the use of fungicides (e.g., based on citric acid), antagonistic fungi or bacteria, chemical treatments (e.g., sulphur, potassium bicarbonate) or genetic resistance. In our study, we aimed to check the effects of using chitosan derivatives and novel active substances inducing the plants' natural resistance: benzodiathiadiazole (both in neutral and salt form). 84 pedunculate oak seedlings were subjected to the experiment in three treatment variants (plus positive and negative controls). The plants were treated with active substances and inoculated with E. alphitoides. Although the powdery mildew symptoms appeared in all variants, they were manifested mainly by the mycelium in the form of small spots. The experiment indicated that the highest limitation of powdery mildew mycelium was achieved by applying N-methyl-N-methoxyamide-7-carboxybenzo(1,2,3)thiadiazole (BTHWA). The application of BTHWA reduced disease development by 88.9% when compared to the effects of the other variants.

Thermal and Electrochemical Properties of Ionic Liquids Bearing Allyl Group with Sulfonate-Based Anions-Application Potential in Epoxy Resin Curing Process.

Sulfonate-based ionic liquids (ILs) with allyl-containing cations have been previously obtained by us, however, the present study aims to investigate the thermal, electrochemical and curing properties of these ILs. To determine the temperature range in which ionic liquid maintains a liquid state, thermal properties must be examined using Differential Scanning Calorimetry (DSC) and Thermogravimetric Analysis (TGA). Melting, cold crystallization and glass transition temperatures are discussed, as well as decomposition temperatures for imidazolium- and pyridinium-based ionic liquids. The conductivity and electrochemical stability ranges were studied in order to investigate their potential applicability as electrolytes. Finally, the potential of triflate-based ILs as polymerization initiators for epoxy resins was proven.

Synthesis and Behavior of Hexamethylenetetramine-Based Ionic Liquids as an Active Ingredient in Latent Curing Formulations with Ethylene Glycol for DGEBA.

The paper presents the preparation of new ionic liquids based on hexamethylenetetramine with bis(trifluoromethanesulfonyl)imide and dicyanamide anion, which were characterized in detail in terms of their purity (Ion Chromatography) and thermal properties (Differential Scanning Calorimetry), as well as stability. The obtained substances were used to develop curing systems with ethylene glycol, which were successfully tested for their application with bisphenol A diglycidyl ether molecule. In addition, the curing process and its relationship to the structure of the ionic liquid are characterized in detail. The research showed that hexamethylenetetramine-based new ionic liquids can be successfully designed using well-known and simple synthetic methods-the Delepine reaction. Moreover, attention was paid to their stability, related limitations, and the application of hexamethylenetetramine-based ionic liquids in epoxy-curing systems.

Optical Fiber Grating-Prism Fabrication by Imprint Patterning of Ionic-Liquid-Based Resist.

We present a method of microstructure fabrication on the tip of the optical fiber using a UV soft-imprint process of polymerizable ionic liquid-based optical resist. Ionic liquid with two UV-sensitive vinylbenzyl groups in the structure was diluted in non-hazardous propylene glycol (PG) to obtain liquid material for imprinting. No additional organic solvent was required. The impact of propylene glycol amount and exposure dose on optical and mechanical properties was investigated. The final procedure of the UV imprint on the optical fiber tip was developed, including the mold preparation, setup building, UV exposure and post-laser cure. As the IL-containing vinylbenzyl groups can also be polymerized by the radical rearrangement of double bonds through thermal heating, the influence of the addition of 1-2% BHT polymerization inhibitor was verified. As a result, we present the fabricated diffraction gratings and the optical fiber spectrometer component-grism (grating-prism), which allows obtaining a dispersion spectrum at the output of an optical in line with the optical fiber long axis, as the main component in an optical fiber spectrometer. The process is very simple due to the fact that its optimization already starts in the process of molecule design, which is part of the trend of sustainable technologies. The final material can be designed by the tailoring of the anion and/or cation molecule, which in turn can lead to a more efficient fabrication procedure and additional functionalities of the final structure.

Halide-Free Continuous Synthesis of Hydrophobic Ionic Liquids.

Herein, we present a novel approach for the halide-free, continuous-flow preparation of hydrophobic ionic liquids (ILs) relying on the bis(trifluoromethanesulfonyl)imide (bistriflimide, NTf2 -) anion. The simple yet fast two-step synthetic route, which involves the formation of different alkyl bistriflimides (R4NTf2), followed by the quaternization with an amine nucleophile, led to the desired ILs in high yields and excellent purities without any byproduct formation. The variable alkyl chain (R4) length and the broad range of the applicable nucleophiles (R1R2R3N) offer considerable flexibility to the synthetic protocol. The quaternization can be performed under solvent-free conditions; moreover, the homogeneous nature of these reactions allows the application of modern continuous-flow technologies. Given these advantages, the methodology can afford not just a fast and efficient alternative for the conventional synthesis of such compounds with reduced waste water production but their negligible halide content might provide a significantly broader application range of the IL products, especially for the field of materials science.

An effect of choline lactate based low transition temperature mixtures on the lipase catalytic properties.

A new series of low transition temperature mixures (LTTM) based on choline lactate quaternary ammonium salt and various hydrogen bond donors was prepared and characterized towards their physicochemical properties and usability as an enzymatic reaction mixture for lipase-catalyzed transesterification reactions. Studies of low transition temperature mixtures have shown a long-term stabilizing effect for lipase as well as a positive influence on lipase thermal stability. In the case of Ch[Lac]:Gly: EthGly increasing the stability of lipase by 8 °C (up to 55.2 °C) compared to the control sample. Conducted transesterification reactions were characterized by high yields - up to 98% - and high purity of the obtained products.

Acceleration of lactose hydrolysis using beta-galactosidase and deep eutectic solvents.

A series of new deep eutectic solvents based on choline levulinate and various hydrogen bond donors were prepared and characterized by1H NMR, FT-IR, TG, and DSC. In particular, their physicochemical properties (density, viscosity, conductivity, and thermal stability) were determined and their usability as an enhancing additive to the enzymatic reaction mixture, for the enzyme was checked. It has been shown, that prepared DES, exhibits low viscosity (at 40 °C within the range 0.1-0.8 Pa·s), high thermal stability (in almost all cases above 150 °C), and density within the range 1.1-1.17 g cm-3. Also, it has been shown, that obtained mixtures can stabilize the enzymes, and positively influence on its activity. The addition of up to 15% (v/v) of DES mixture composed of choline levulinate: ethylene glycol, enhanced more than threefold lactose hydrolysis yield by ß-galactosidase. The present study shows the relevance of the newly designed DES series for improving enzymes properties with the potential to apply in the effective conversion of food processing origin substrates.

A New Benzothiadiazole Derivative with Systemic Acquired Resistance Activity in the Protection of Zucchini (Cucurbita pepo convar. giromontiina) against Viral and Fungal Pathogens.

The ability of plant resistance inducers to provide protection against viral diseases is one of their main advantages over conventional pesticides. In the case of viral diseases that cannot be controlled directly with pesticides, insecticides are used to control the vectors of viruses. However, the effectiveness of such treatments is strictly dependent on the time of application. The plant response to the application of systemic acquired resistance (SAR) inducers, as a result of the stimulating action of these substances, does not depend on the time of application as it triggers the plant's natural defence mechanism. The best-recognised substance showing SAR inducer activity is acibenzolar-S-methyl ester (ASM, BTH). As its activity against different plant pathogens of crops has been well documented, the current research is concentrated on the search for novel substances of the type. The tested substance, N-methoxy-N-methylbenzo(1,2,3)thiadiazole-7-carboxamide (BTHWA), is an amide derivative of benzothiadiazole, showing plant resistance-inducing activity. This article presents the activity of BTHWA that has led to increased resistance of zucchini (Cucurbita pepo convar. giromontiina) towards viral infections. In addition, since the occurrence of the fungal pathogen, powdery mildew, was also observed during the two-year field experiments, the activity of BTHWA related to the reduction of infection with this fungus was also investigated. The substance was applied in two different variants either four or eight times, over the whole vegetation season. Surprisingly, the variant of four applications performed at the beginning of the vegetation season proved more effective in protection against viruses and fungus. A possible explanation may be the occurrence of the growth-immunity trade-off phenomenon that is known in the literature. Disturbance in plant metabolism resulting from eight applications may lead to lower yields of plants treated with SAR inducers. Perhaps such overstimulation of the plants we treated eight times may not have brought the optimum increase in plant resistance.

Synthesis, characterization and biological activity of bifunctional ionic liquids based on dodine ion.

BACKGROUND: Development of new plant protection strategies has become an urgent matter in modern agriculture, in view of the evidently proved negative effect of currently used active ingredients of pesticides. In recent years, much effort has been made to eliminate the use of pesticides established to be toxic to pollinators. RESULTS: In this study, we present a group of new bifunctional ionic liquids based on dodine (N-dodecylguanidine) cation whose physical and biological properties have been modified relative to those of the commercially available N-dodecylguanidine acetate. The decreased level of residue of active substances in plant tissues reduces their availability to pollinators, which increases the safety of their use. Moreover, lower environmental impact in combination with high antifungal activity and an additional biological function, that is the systemic acquired resistance induction, are in line with the goals of sustainable agriculture. CONCLUSION: The presented approach shows the possibility of derivatization of commonly used fungicide into the form of bifunctional salts whose physical and biological properties can be easily modified. The paper reports successful design and synthesis of new sustainable and green chemicals for the modern agriculture, being less toxic to the environment and human health but still effective against pathogens. © 2021 Society of Chemical Industry.

The Co-Culture of Staphylococcal Biofilm and Fibroblast Cell Line: The Correlation of Biological Phenomena with Metabolic NMR1 Footprint.

Staphylococcus aureus is one of the most prevalent pathogens associated with several types of biofilm-based infections, including infections of chronic wounds. Mature staphylococcal biofilm is extremely hard to eradicate from a wound and displays a high tendency to induce recurring infections. Therefore, in the present study, we aimed to investigate in vitro the interaction between S. aureus biofilm and fibroblast cells searching for metabolites that could be considered as potential biomarkers of critical colonization and infection. Utilizing advanced microscopy and microbiological methods to examine biofilm formation and the staphylococcal infection process, we were able to distinguish 4 phases of biofilm development. The analysis of staphylococcal biofilm influence on the viability of fibroblasts allowed us to pinpoint the moment of critical colonization-12 h post contamination. Based on the obtained model we performed a metabolomics analysis by 1H NMR spectroscopy to provide new insights into the pathophysiology of infection. We identified a set of metabolites related to the switch to anaerobic metabolism that was characteristic for staphylococcal biofilm co-cultured with fibroblast cells. The data presented in this study may be thus considered a noteworthy but preliminary step in the direction of developing a new, NMR-based tool for rapid diagnosing of infection in a chronic wound.

Electron Beam Patterning of Polymerizable Ionic Liquid Films for Application in Photonics.

Planar photonic components can be fabricated with high resolution by electron beam patterning of polymer thin films on solid substrates such as silicon and glass. However, polymer films are normally formed by spin-coating lithographic resists containing not only polymers but also volatile solvents, which is a serious environmental and health issue. Therefore, we investigate a new type of material for planar structure fabrication (i.e., room-temperature ionic liquids (RTILs) with a polymerizable allyl group) that is electron-beam-curable, solvent-free, and thus potentially interesting for processing materials with weak resistance to solvents. We fabricate planar polymer microstructures by electron beam patterning of RTIL thin films in vacuum, which is possible because of the negligible volatility of ionic liquids. Three different polymerizable ionic liquids {i.e., [Allmim][Cl] (1-allyl-3-methylimidazolium chloride), [Allmim][NTf2] (1-allyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide), and [Allmmim][NTf2] (1-allyl-2,3-dimethylimidazolium bis(trifluoromethylsulfonyl)imide)} are compared in terms of the quality of the fabricated microstructures. We demonstrate that the shape of the more viscous RTIL with the Cl- anion is less distorted during electron-beam-activated polymerization than the shape of the less viscous RTILs with a large NTf2- anion. Furthermore, the surface tension of the NTf2-based ionic liquid decreases significantly with temperature as compared to that of the Cl-based ionic liquid. Thus, we suggest that the thermocapillary effect, that is, the Marangoni flow caused by a temperature gradient, might be responsible for the differences in the shape of the RTIL-derived microstructures. Also, we analyze the chemistry of the electron-beam-activated polymerization of RTIL by the use of Fourier-transform infrared spectroscopy (FTIR) and conclude that because of the disappearance of C═C bonds the free radical polymerization is a probable reaction mechanism. Finally, we show that polymerized microstructures are potentially attractive as planar photonic components because of good optical properties such as a high refractive index.

Versatile Method for the Simultaneous Synthesis of Two Ionic Liquids, Otherwise Difficult to Obtain, with High Atom Economy.

A new synthetic approach and full spectral (NMR, IR, MS) and ion chromatographic characterization (IC) of nitrogen-based ionic liquids bearing allyl- or ethyl- substituent and triflate, tosylate, methyl sulfate or methanesulfonate anion has been presented. On a sample of 16 new ionic liquids, the versatility of the anion exchange method has been proven. In the metathesis reactions that have been carried out, the halide anion was exchanged in ionic liquid with an alkyl sulfonate based anion using alkylating agents. The results obtained using ion chromatographic analysis on the newly synthesized compounds have been discussed. Also, the utilization of a gaseous methyl halide by-product, obtained in the metathesis reaction and otherwise difficult to synthesize, has been presented. This approach ensured high atom economy of the overall process, which makes the proposed methodology sustainable and eco-friendly.

Deep eutectic solvents based on choline cation - Physicochemical properties and influence on enzymatic reaction with ß-galactosidase.

In presented study analysis of physicochemical properties of deep eutectic solvents (DESs) and their usefulness as an element of reaction medium for ß-galactosidase from Kluyveromyces lactis was conducted. Analyzed DESs were based on choline salt derivatives: choline chloride, choline acetate and hydrogen bond-donors (HBD) such as: glycerol, ethylene glycol, urea, thiourea and levulinic acid. Results showed that reaction medium with appropriate amount of DES based on choline acetate had beneficial effect on activity of ß-galactosidase. The 5% (v/v) addition of developed choline acetate:glycerol DES mixture enhanced enzyme activity almost three fold. The results of performed experiments have also revealed that ß-galactosidase activity is less affected by the organic anion as choline acetate in ionic liquid, than inorganic anion as choline chloride. The developed green solvents as DES based on choline acetate exhibit a wide application potential that can be used to increase efficiency of enzyme-based industrial process.

Assessment of the Efficacy and Mode of Action of Benzo(1,2,3)-Thiadiazole-7-Carbothioic Acid S-Methyl Ester (BTH) and Its Derivatives in Plant Protection Against Viral Disease.

Systemic acquired resistance (SAR) induction is one of the primary defence mechanisms of plants against a broad range of pathogens. It can be induced by infectious agents or by synthetic molecules, such as benzo(1,2,3)-thiadiazole-7-carbothioic acid S-methyl ester (BTH). SAR induction is associated with increases in salicylic acid (SA) accumulation and expression of defence marker genes (e.g., phenylalanine ammonia-lyase (PAL), the pathogenesis-related (PR) protein family, and non-expressor of PR genes (NPR1)). Various types of pathogens and pests induce plant responses by activating signalling pathways associated with SA, jasmonic acid (JA) and ethylene (ET). This work presents an analysis of the influence of BTH and its derivatives as resistance inducers in healthy and virus-infected plants by determining the expression levels of selected resistance markers associated with the SA, JA, and ET pathways. The phytotoxic effects of these compounds and their influence on the course of viral infection were also studied. Based on the results obtained, the best-performing BTH derivatives and their optimal concentration for plant performance were selected, and their mode of action was suggested. It was shown that application of BTH and its derivatives induces increased expression of marker genes of both the SA- and JA-mediated pathways.

Continuous flow synthesis of diaryl ketones by coupling of aryl Grignard reagents with acyl chlorides under mild conditions in the ecofriendly solvent 2-methyltetrahydrofuran.

An efficient continuous flow sequential synthesis of diaryl ketones was achieved by coupling of aryl Grignard reagents with acyl chlorides in the bio-derived "green" solvent 2-methyltetrahydrofuran (2-MeTHF) under mild reaction conditions (ambient temperature, 1 hour), allowing a safe and on-demand generation of 2-(3-benzoylphenyl)propionitrile with a productivity of 3.16 g hour-1.

Ionic liquids-a novel material for planar photonics.

Electron beam patterning is an important technology in the fabrication of miniaturized photonic devices. The fabrication process conventionally involves the use of radiation sensitive polymer-based solutions (called resists). We propose to replace typical polymer resists with eco-friendly solvent-free room temperature ionic liquids (RTILs), which are polymerized in situ and solidified by an electron beam. It is demonstrated that the shapes of polymerized structures are different for high-viscous Cl-based RTILs and low-viscous NTf2-based RTILs. Due to the the satisfactory quality of the polymerized spatial microstructures and their light transmission properties, the RTIL-derived microstructures are potentially attractive as photonic elements for near-infrared.